Distilled water machine to prepare household drinking water, and bid farewell to water additives
Tap water is added just below the Full scale line, and the distillation time must be controlled within 3 and a half hours to prevent too much bottom of distillation dirt.
After the distilled water machine is finished and powered off, put it aside for cooling to dissipate heat. After a few hours the distillation can be started again.
Please take out the activated carbon from the outlet
Power 750W, simple operation, instructions, distilled water machine is divided into upper and lower parts, the main engine assembly is equipped with tap water, below FULL grid line, cover the head assembly, plug the head power cord into the head socket, plug the main engine power supply into the wall socket, turn on the ON/OFF switch of the main engine, then press the start button, the start button indicator light is on, the head fan starts to rotate, the main engine enters the heating state, when the head is heated for about 30 minutes, distilled water slowly drips from the water outlet of the host until the water in the inner tank is completely dried. (Before the first use, you need to add 1L of water and 2 tablespoons of citric acid. After working for 20 minutes, the main engine will be drained and cleaned)